Re: Dimensions of 25" or 27" TV's without case

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by J_K_M_A_N on January 10, 2002 at 15:56:56:

In Reply to: Dimensions of 25" or 27" TV's without case posted by Thayer on January 10, 2002 at 14:30:37:

I am going to try the same thing. I haven't taken it out of the case yet, but my 27" TV seems to be about 22~23" wide. I only have 23" inside my cab so I don't think I can fit it. I am not sure about the 25", but with 24", you should be able to fit a 27". Good luck.

J_K_M_A_N

: I'm using an old Zaxxon cab for my Mame project and the width is only 24" inside of it.

: I've read on here that some have removed the TVs from their case / shell to make them fit in an arcade cab.

: For anyone who has done this, what is the width of a 25" or 27" TV once it's been removed from it's shell?

:
: Thanks,

:
: Thayer

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: I am going to try the same thing. I haven't taken it out of the case yet, but my 27" TV seems to be about 22~23" wide. I only have 23" inside my cab so I don't think I can fit it. I am not sure about the 25", but with 24", you should be able to fit a 27". Good luck. : J_K_M_A_N : : : I'm using an old Zaxxon cab for my Mame project and the width is only 24" inside of it. : : I've read on here that some have removed the TVs from their case / shell to make them fit in an arcade cab. : : For anyone who has done this, what is the width of a 25" or 27" TV once it's been removed from it's shell? : : : : Thanks, : : : : Thayer

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]