Re: EyGo 27": link to sale: To Joe and LilWolf


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by joe on January 10, 2002 at 17:20:36:

In Reply to: Re: EyGo 27": link to sale: To Joe and LilWolf posted by lightspeed on January 10, 2002 at 17:13:41:

26.5" wide by about 20.25" high (measured at top handle midway back the steel frame)

Give or take .25"...

If this guy is losing 1/3 of his stock due to UPS destruction, don't be too surprised if he hands off obvious shipment damage to UPS insurance.. I would certainly double-check.

j
:
: Hi there -

: Joe: Would you mind posting the dimensions?
:
: LilWolf: Thanks for posting the info - they are warranted for 30 days, so i'm assuiming that covers shipping. Did you get yours from the same source?

:
: Thanks,
:
: light

: : I bought two (can't be too safe). Knowing the damage UPS causes during shipment, I drove down to LI and picked them up myself. Guy selling them was very helpful - no problems whatsoever.

: : So far I'm very happy with them. Neither seems to have any flaws, although I haven't really tested the second one out fully.

: : They're not in a case - simply the steel cage. Since I'm building my own cabinet, I prefer this arrangement. Very sturdy and plenty of handles to grab with. If you don't get the measurements let me know and I'll measure one of mine.

: : I initially was going to go with a TV but like this option better. I'm less of a purist than most and prefer the clarity over the flicker I was getting off the video card/tv combo. Also cheaper and easier to mount than a 27" television.

: : j





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]