Re: oops

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by dhansen on January 15, 2002 at 09:38:20:

In Reply to: Re: oops posted by Ryan on January 15, 2002 at 04:48:17:

: I had a look at the AVI.

: It's just a guess but it might be the Demagnetizing
: Coil being left on. It's meant to be only on at
: power up for a few seconds. The demagnetizing coil
: is around the edge of the screen. With the power
: OFF follow the 2 wires which lead from the coil and
: plug in the the monitor PCB it is usually marked
: D Coil. Unplug the coil and next time you power
: the monitor up see what happens.

: Ryan

: : Here's the second pic...

: : http://www.doughansen.net/arcade/monitor2.jpg

Thanks for the response!! I'll check it out tonight..

Doug

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: : I had a look at the AVI. : : It's just a guess but it might be the Demagnetizing : : Coil being left on. It's meant to be only on at : : power up for a few seconds. The demagnetizing coil : : is around the edge of the screen. With the power : : OFF follow the 2 wires which lead from the coil and : : plug in the the monitor PCB it is usually marked : : D Coil. Unplug the coil and next time you power : : the monitor up see what happens. : : Ryan : : : Here's the second pic... : : : http://www.doughansen.net/arcade/monitor2.jpg : Thanks for the response!! I'll check it out tonight.. : Doug

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]