Re: ¿Can convert to 15Khz/60hz signal??

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Pegasus37 on January 15, 2002 at 17:59:19:

In Reply to: Re: ¿Can convert to 15Khz/60hz signal?? posted by JMDickson on January 15, 2002 at 13:26:07:

I actually just called Avermedia's tech support line. I asked them about this, and what was stated before (below) is correct according to what they told me. The 24-108 KHz IS THE INPUT it can handle. The output is standard NTSC, where the Horizontal Frequency is the 15Khz.

Pegasus37

: The box can handle INPUT from 24Khz to 108 Khz, OUTPUT is 15Khz.

: : Reading the product specs I see it works at 24Khz, but dont say nothing about the 15khz (Standard Arcade Mode).

: : The output is in RGB perfect, but the 24khz output drives me crazy :-((

: : : Anyone using this with a standard arcade monitor?

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: I actually just called Avermedia's tech support line. I asked them about this, and what was stated before (below) is correct according to what they told me. The 24-108 KHz IS THE INPUT it can handle. The output is standard NTSC, where the Horizontal Frequency is the 15Khz. : Pegasus37 : : The box can handle INPUT from 24Khz to 108 Khz, OUTPUT is 15Khz. : : : Reading the product specs I see it works at 24Khz, but dont say nothing about the 15khz (Standard Arcade Mode). : : : The output is in RGB perfect, but the 24khz output drives me crazy :-(( : : : : Anyone using this with a standard arcade monitor?

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]