Re: RJ45 and Cat 5 for swappable CP's?


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Munich on January 16, 2002 at 12:58:17:

In Reply to: Re: RJ45 and Cat 5 for swappable CP's? posted by Dave K. on January 16, 2002 at 12:16:27:

I have to believe that just about anything would work. I wound up using 15pin VGA connectors.


: If you have the right tools to crimp them easily with a connector, go for it. May have to use 2 plugs per player control. The point being Molex connectors are expensive! I've recently been using DB25 connectors with ribbon cable (much cleaner wiring) and Radio Shack has them on clearance for $0.69 each! I bought them all up around my area :-)

: -Dave

: : Has anyone else thought of using or used standard ethernet cabling and couplers for a way of using quick connects and/or swappable control panels? Granted, with only 8 wires, you'd need a few for a CP with a lot of buttons or different kinds of controls, but the simplicity of it would seem to make sense.

: :
: : Dave A.





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]