Re: How about dimensions for the Happs 19" monitor bezel?


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by PCC on January 16, 2002 at 16:08:11:

In Reply to: Re: How about dimensions for the Happs 19" monitor bezel? posted by PCC on January 16, 2002 at 15:48:42:

Just to clarify, I’m talking about arcade monitors and not PC monitors. The dimensions for PC monitors are different, but I’d guess the Bezel would fit a 20” PC monitor as well.

: The Happ 19" plastic bezel measures about 25"x25" (just trim it to fit). I have an 18" monitor and the bezel is almost a perfect for it (only revealing a little black around the viewable area of the screen). I believe that Happ sells these as bezels for 19” and 20” monitors, so it should fit nice.

: : My cocktail cabinet needs one bad, and I have a 20" monitor in there. I don't want to shell out the $$$$ if it won't fit.

: : : This has been asked a time or two around here...

: : : I received mine today and took a pic before I cut it fit my cab. Dimensions not shown on the graphic is that the lip, or inset, of the bezel is about 1" deep at the centers of the monitor opening and 2" deep at the corners for the tube curvature.

: : : Hope this helps those that were asking about it.

: : :
: : : --OSCAR
: : : .





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]