Re: help working with surface mount components...

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Dave K. on January 17, 2002 at 12:30:24:

In Reply to: Re: RGB to composite video (NTSC) ? posted by Tom61 on January 17, 2002 at 12:12:18:

Tom, I'm working on a project now that uses a 16 pin SOIC package chip. I've never soldered one of these before (and really don't see how without a very fine iron). I'm putting it on a prototyping surfboard-SIP module . Can you explain in a little more detail about the solder paste and heat gun method?

Thanks.
-Dave

: Can you do surface mount circuitry? (as in solder paste and heat type) If so, get an AD725 from Analog Devices, I hear its a really good chip.

: : I am trying to build a Supergun , does any one out there know a simple way to convert the 5 pin RGB output to composite video without buying a costly converter . I would like to keep it a cheap project . Any help would be great .
: : Thanks
: : Geo

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: Tom, I'm working on a project now that uses a 16 pin SOIC package chip. I've never soldered one of these before (and really don't see how without a very fine iron). I'm putting it on a prototyping surfboard-SIP module . Can you explain in a little more detail about the solder paste and heat gun method? : Thanks. : -Dave : : Can you do surface mount circuitry? (as in solder paste and heat type) If so, get an AD725 from Analog Devices, I hear its a really good chip. : : : I am trying to build a Supergun , does any one out there know a simple way to convert the 5 pin RGB output to composite video without buying a costly converter . I would like to keep it a cheap project . Any help would be great . : : : Thanks : : : Geo

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]