No need to reply... Solved some of my problems :-) Started new thread.


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by xthrees on January 21, 2002 at 07:00:48:

In Reply to: Arcadeos / Advancemame with an arcade monitor - problems posted by xthrees on January 20, 2002 at 05:39:43:

: Hi there to the helpful reader :)

: 3 questions since my knowledge of arcade monitor problems and frequencies is a tad low :( But learning at least :)))
: Q1 : when Arcadeos is used, the .cfg is edited to output to a arcademonitor and it is launched. For some reason though, the 'resolution' [I think it's the res at least] is too high -> making the menu unreadable. Is there some way to change this [eg : only 20 games visible / page instead of 100 :) ]. A month ago, I tried it with a Geforce2 and it worked ok. Strange stuff is happening...
: Q2 : next up was AdvanceMame -> I have an Intervideo 28'' with HFreq 15.625Khz +/- 500hz and VFreq = 50 Hz. Only the standard 15Khz default arcademonitor will yield a decent first test image but the modes after this are either fast scrolling or erratic. Why oh why? :( Yeps, even tried adding a custom monitor with the above parameters but this hasn't produced anything positive [even worse if I may say so]
: Q3 : Pacman and vertical games like that -> again, a month ago I gave them a whirl with ArcadeOS but they were 'tiny' when playing horizontally >>> is there a way to play them 'stretched' in some way [let me guess? Could the answer be AdvMame? hehe]. Any horizontal game came up perfectly...

: thanks a lot for ANY help,
: kind regards,
: /xthrees

: PS1 : Oh yeah, I can also be mailed @ 100200.[at].xthrees.[dot].com
: PS2 : I have both an I-PAC and a J-PAC in my cabinet if this matters? [switch on the 15 setting]





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]