Re: KE24 config and Windows XP


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Johnpurs on February 16, 2002 at 22:12:34:

In Reply to: KE24 config and Windows XP posted by Nightowl007 on February 16, 2002 at 21:20:37:

The NT OSes Do not allow Direct Access to Hardware. I believe this is why you can't do it there are a few threads down below here about possible workarounds. These were posted earlier this week by Ron who makes the MK40/64 encoders. Check that out for a possible workaround. Pobably easiest to continue to use a boot disk though.

Nice Cab by the way!
John


: Anyone get the ke24cfg program to work under Windows XP?

: Mine says it can't connect to the KE24 encoder.

: I can boot to a Windows 98 boot disk and it works, but I can't config it under Windows XP.

: Any ideas?





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]