Re: how to make dos boot?

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Rocket2600 on February 17, 2002 at 19:56:58:

In Reply to: how to make dos boot? posted by Jim on February 17, 2002 at 19:15:33:

Hi it would be easier to just boot into straight DOS by turning GUI=1 into GUI=0 in your MSDOS.SYS file. Then anytime at the DOS promt you can boot Windows by typing WIN. Easy to do and very simple. You can have GL start also by adding a command line in your AUTOEXEC.BAT file. This is what most people do when they have a PC dedicated to a cabinet. Good luck.

~Rocket2600

: Hi,
: I want to run my GLAUNCH in pure dos...i need to know how to make a floppy disk that will load dos and the program..i have it running off the hd but i hate going into dos..want it off the floppy..when floppy is out it goes to windows..if u can explain to me how to do this that would b great, and I would very much appreciate it.

Joust to MAME

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: Hi it would be easier to just boot into straight DOS by turning GUI=1 into GUI=0 in your MSDOS.SYS file. Then anytime at the DOS promt you can boot Windows by typing WIN. Easy to do and very simple. You can have GL start also by adding a command line in your AUTOEXEC.BAT file. This is what most people do when they have a PC dedicated to a cabinet. Good luck. : ~Rocket2600 : : Hi, : : I want to run my GLAUNCH in pure dos...i need to know how to make a floppy disk that will load dos and the program..i have it running off the hd but i hate going into dos..want it off the floppy..when floppy is out it goes to windows..if u can explain to me how to do this that would b great, and I would very much appreciate it.

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]