Re: OSCAR plates ?

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Darrin Z on February 20, 2002 at 21:12:17:

In Reply to: OSCAR plates ? posted by amphmonk on February 20, 2002 at 19:17:27:

I purchased two kits from Oscar and you have the choice of pins or screws... If you choose screws the nuts are welded onto the bottom of the mounting plate.

: Hi all,
: Quick ?....for the OSCAR restrictor plates if you go with the screws, are the nuts secured to the underside of the mounting plate?

: If not, is there any reason why I couldn't tack weld them in place so that I could just remove the screw (allen head) and then the plates would come off?

: I know nothing of how the plates come off so I may be off base. For reference, using Comp sticks with 1/2" plywood with about 3" of clearance on underside of ctrl panels.

: thx...matt faile

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: I purchased two kits from Oscar and you have the choice of pins or screws... If you choose screws the nuts are welded onto the bottom of the mounting plate. : : Hi all, : : Quick ?....for the OSCAR restrictor plates if you go with the screws, are the nuts secured to the underside of the mounting plate? : : If not, is there any reason why I couldn't tack weld them in place so that I could just remove the screw (allen head) and then the plates would come off? : : I know nothing of how the plates come off so I may be off base. For reference, using Comp sticks with 1/2" plywood with about 3" of clearance on underside of ctrl panels. : : thx...matt faile

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]