Re: Great idea!


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Dominic Carissimi on February 26, 2002 at 13:31:14:

In Reply to: Great idea! posted by Lilwolf on January 23, 2002 at 11:15:10:

: My old roommate used to be an artist and had this stuff around all the time.

: hows the durability?

: does it shrink/stretch?

: btw, if it's for a control panel I went and got a cheap scratched counter top (black) from builders square for 10bucks. I was able to make 2 control panels out of it. No need for any coverings. Drilling was a pain since you have to worry about chipping at the time of drilling.

: For my next control panel, I think I'm going to go with plywood and plexi. So this might be perfect!

Next time try putting a large piece of masking tape down before you drill the holes. I know this works for long cuts to minimize chipping of laminates and wood.

D.





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]