Re: 19" Eygo VGA monitor to PC, problems???


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by hoovie on May 01, 2002 at 18:28:25:

In Reply to: 19" Eygo VGA monitor to PC, problems??? posted by Joe Geisler on April 11, 2002 at 20:15:20:

: I bought an Eygo VGA monitor off of ebay that works great, it boots up fine with windows startup screen, but when it gets to the desktop the screen is all screwed up with scanlines, any solutions for getting the picture back to normal?
=================================================
I have 4 Eygo VGA monitors all working great with
windows 98. Start windows in safe mode(hold F5
key down during boot). goto settings, control panel, display. click advanced and make sure monitor is set to 60 hertz & use standard 640X480 VGA. click apply, ok and when windows start back up It should be better. load your VGA adapter drivers and you should be OK. In some cases you may need to buy another adapter board. ATI Rage II is fine and cheap on Ebay.
Good Luck!
hoovie



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]